DickOu goto application page, press reset database button. Then goto flight controller and select gpio. Press connect.
Now you should be able to connect mission planner using rpi ip and port 5790.
Or add a udp destination in ground control.
Sinamics Now mission plan connect UAVcast. but the status light of flight controller configuration page still stay in red color
Ok will test it tomorrow go to bed now,thank you
DickOu can you please send me new logfile for review
Sinamics log file attached
Sinamics one question, UAVcastPro dashboard page, CPU window, power( undervoltage detection) and CPU throttling two lights red flash, is it harmful? how to eliminate it?
DickOu one question, UAVcastPro dashboard page, CPU window, power( undervoltage detection) and CPU throttling two lights red flash, is it harmful? how to eliminate it?
RPI can shutdown or reboot by itself if you dont have proper power source.
Take a look here.
Does the LED always stays in RED color? do you get any FC information in the cockpit page?
for RPI 3 or RPI 4, yes leds always stay in RED flash, for RPI 0 alway stay in green. they are all connect to same pixhawk telemetry port. and I check its voltage, around 5V.
OK I use different power source for RPI3 and RPI 4, lights turn to green. porblem solved. thank
regret, I update from v4.0.5 to v4.0.61 then telemetry don't work again, telemetry mold =1 and GPIO
DickOu can you post logfiles again.
this morning I wake up and conect all my UAVcast and test, don't know why all problem gone. status light of telemetry page turn green. all return to normal. feel good.
does video of v4.6.1 work properly? uavcast dashboard vide video streamo status led green. but MP can't receive
DickOu sure it works. Please disable firewall if you are on windows.