Sinamics DickOu goto application page, press reset database button. Then goto flight controller and select gpio. Press connect. Now you should be able to connect mission planner using rpi ip and port 5790. Or add a udp destination in ground control.
DickOu Sinamics Now mission plan connect UAVcast. but the status light of flight controller configuration page still stay in red color
DickOu Sinamics one question, UAVcastPro dashboard page, CPU window, power( undervoltage detection) and CPU throttling two lights red flash, is it harmful? how to eliminate it?
Sinamics DickOu one question, UAVcastPro dashboard page, CPU window, power( undervoltage detection) and CPU throttling two lights red flash, is it harmful? how to eliminate it? RPI can shutdown or reboot by itself if you dont have proper power source. Take a look here. https://docs.uavmatrix.com/hardware/#power-supply Does the LED always stays in RED color? do you get any FC information in the cockpit page?
DickOu for RPI 3 or RPI 4, yes leds always stay in RED flash, for RPI 0 alway stay in green. they are all connect to same pixhawk telemetry port. and I check its voltage, around 5V.
DickOu OK I use different power source for RPI3 and RPI 4, lights turn to green. porblem solved. thank
DickOu regret, I update from v4.0.5 to v4.0.61 then telemetry don't work again, telemetry mold =1 and GPIO
DickOu this morning I wake up and conect all my UAVcast and test, don't know why all problem gone. status light of telemetry page turn green. all return to normal. feel good.
DickOu does video of v4.6.1 work properly? uavcast dashboard vide video streamo status led green. but MP can't receive
