Pixhawk 2.1 with UAVcast/Rpi

vibmad

I m using uavcast only to stream telemetry (via 3g/4g network) data from pixhawk 2.1 (worsk same on pixhawk. Apm) ...video is coming from cube ...quality is quite poor and shaky

Today flown mission 8.8 km ...max dist 3.7 kms from home with 94% strengh signal on 4g network !!!

Terrysavage

vibmad So you are not controlling the drone via 4g? Just receiving telemetry data over 4g?
Video is recorded locally.
and the fatshark is transmitting 1.2ghz for FPV whilst flying?

vibmad

Terrysavage for radio i m using uhf 433 ... i have video connect to a screen on 1.3 ghz .... but such a good signal i guess you can radio/video over 4g easily

Sinamics

vibmad but such a good signal i guess you can radio/video over 4g easily

For sure. 😸
Telemetry including Gamepad (Radio) is just a few Bytes of data, and will easily be transferred using 2G or even edge. Video demands more bandwidth, but 3G and 4G will do for sure.

vibmad

trying to set up my video feed. I changed the scrip droneconfig to put yes for camera and selected my C920...
when I connect the camera to usb at start up ..the light is on and I can it on lsusb ... but when I laucnhed the script on windows you gave me I have a grey screen on MP ?

https://ibb.co/iK6Qyv

Sinamics

vibmad

Hi
You cannot transcode gStreamer to Mission Planner directly.. so that wont work..
However, you should get a seperate window viewing the video..

Are you trying this on your local network? or using cell?
Have you verified that you use correct port ect?

vibmad

ah okay did not know about MP... I don't get a new windows opened ? the port you gave is 5000 I think no in the script...it used to work on VLC so I should work on gstreamer ? let me try some more...
I don't know why when I click on the script the windows on MP come grey ?

Sinamics

vibmad
The Default Port is 5000. Your gstreamer seems fine, it just dont receive any signal from RPI.
A new window will open as soon as the signal is received.

It should work with gStreamer if VLC worked, that is correct.
gStreamer should not have any impact on the MP HUD.. unless you have installed any 3rd party software.

vibmad

let me try again ..cheers vincent

vibmad

sorry no flying...was travelling away..bad weather ...the kids...hope to try again my testing this week end...planning a 10 km mission ..

Sinamics

vibmad

vibmad .bad weather ...the kids...hope to try again my testing this week end

Yeah, tell me about it.. 😀
Looking forward to see some vids though, specially from a 10Km mission 🚀 . Would be awesome 🙂

vibmad

this project is dead i crashed my fx 61 last week end ...i had a gps glitch and plane went down very fast...but telemetry was great 😂 ... was a human mistake.... i already moved to an other plane go discovery from hk ...
all electronics survived the crash ...just a new frame.... easy

and then i burned my rasp 3 ...by touching bottom of rasp with a red cable from battery ...roocky mistake ...now i apply foam on bottom of rasp...already received my new rasp 3 .... will start again soon...

Sinamics

vibmad
Sorry to hear about that, but im glad all the electronics survived though.
I had a fly away once, with an Skywalker X8 loaded with equipment. I forgot to check the GCS failsafe, and lost communication when i flew down a valley with 95% battery left. I never saw it again. That sucks. 😡

vibmad

Sinamics oh man.... that's hard one .... x8 ..no

vibmad

my uhf immersion rc signal is very powerfull ...i can trigger rtl quite far ...i need to configure rssi
the guys at build your own drone in uk has a massive bargain... half the price the spain if you are intrerested in uhf ..

CarlosGarcia

Hello, Is there any updated info on the pixhawk 2.1 with edison? Can I eliminate the rasberry pi?
Any info on set up would be greatly appreciated.

RemoteOperations

Nice setup!
How is the connection between PH2.1 and RPI? is it to the telemetry 1 or 2 cable?
is it possible to connect one of the mini USB connectors on on PH2.1 to RPI's USB to get connection?

« Previous Page