UAVcast. Software for Companion Computer based UAV`s

Sinamics

BillyLam
Hmm...
Could you type systemctl status UAVcast and post the output when it loading

BillyLam

● UAVcast.service - UAVcast Drone Software
Loaded: loaded (/lib/systemd/system/UAVcast.service; enabled)
Active: inactive (dead) since Wed 2017-10-11 13:36:33 UTC; 7min ago
Process: 5603 ExecStart=/bin/bash DroneStart.sh start (code=exited, status=0/SUCCESS)

I found out I might need to do something with ''open port'' but I remember last time I have success with local connection (non Web UI) without doing setting in my router. would this be the problem.

Sinamics

BillyLam
Can you also check if you have folder within UAVcast named emlid. Example
UAVcast/emlid/navioor UAVcast/emlid/navio2

I currently doing a fresh install of Navio myself..

BillyLam

Sinamics

It saids no such file directory

-bash: cd: UAVcast/emlid/navio2: No such file or directory
pi@navio:~/UAVcast $ cd UAVcast/emlid/navio
-bash: cd: UAVcast/emlid/navio: No such file or directory

Sinamics

BillyLam
hmm,, i think you got a permission error.
Did you download the Binary in web setup? e.g arduplane?

Please try this:
chmod 777 -R /home/pi/UAVcast/

And then configure everything from web interface again.

BillyLam

Sinamics

It's working ! Ill now try config LTE (Dynss etc) btw would you reckon I could use my phone wifi hotspot as (dongle) because the SIM I use for my 4G dongle is out of credit. (laptop connected to home wifi and Pi connect to phone hotspot) Ill keep you update.

thanks !

BillyLam

Sinamics

as you reckon It was a permission problem

I ran the cmd you provided and the pi started doing its things 😉

Sinamics chmod 777 -R /home/pi/UAVcast/

Sinamics

BillyLam It's working !

Im glad you got it working. What was the solution?

BillyLam could use my phone wifi hotspot as (dongle) because the SIM I use for my 4G dongle is out of credit.

Sure you can..

Sinamics

For your information.
I have installed web version two times now on RPI3 and two times on RPI2 including Navio+ & Navio2 version with exact instructions described Sinamics without any problems.

Notice!
When installing Navio image, remember to select your frame type Binary from the Flight Controller Menu
UAVcast will download each frame type if they not exsist. You will be promted before download starts.

Sinamics

BillyLam
Thank you for the information. I will update UAVcast to give correct permission to emlid folder

Sinamics

UPDATE v0.3.5

I have ripped out all the old modem software (wvdial, UQMI) and replaced with Modem Manager and Network manager. This is a much more reliable platform for cell devices and it gives more verbal information upon connection and its much easier to troubleshoot if you should have any problems.

Another great feature with Network Manager is Autoconnect. 🙂 👍

Supported Modems can be found here. https://www.freedesktop.org/wiki/Software/ModemManager/SupportedDevices/

I also added allot of new features to troubleshoot and get diagnostic information directly from the Web interface.

BillyLam

Sinamics
hello Bernt
Do I follow the same step to update to latest version of UAVcast ?

Sinamics If anyone wants to try out my new UAVcast branch, then do these steps.

rm -rf UAVcast/ (if you have UAVcast already installed)
sudo apt-get update
sudo apt-get install git -y
sudo git clone -b Web_UI https://github.com/UAVmatrix/UAVcast.git

cd UAVcast/install
sudo ./install.sh web (notice the web argument)

thanks

Sinamics

BillyLam
Yes, do the same steps to be sure you get everything.
However, in most cases a git pull from UAVcast directory will be sufficient to get the last changes, but that depends on which version you upgrading from.

Sinamics

New UPDATE v0.4.0 which include

New webinterface layout
Added Links to documentation and forum i header.

I also created a sub domain for documentation http://uavcast.uavmatrix.com

Feel free to add content you think should be in there. https://github.com/UAVmatrix/UAVcast_Docs/blob/master/index.html

Enjoy 🙂 ✈

AsemAlasemy

thanx 4 every 1 how contributed in this project i have run last UAVcast web and it ran like charm i ll tray to add 3d mapping to make some pay back from my side
thanx all and have fun

Sinamics

AsemAlasemy Thank you for the feedback.. ♥ Im glad it worked 🙂
3d mapping would be awesome... 👍

MohammadSultanOtaiby

AsemAlasemy
plz contact my
alshar044@gmail.com

Sinamics

UPDATE v0.4.1 which include

OpenVPN integration.

OpenVPN discussion thread and installation procedure here mocart

mocart

Sinamics UPDATE v0.4.1 which include

i dont like the latest left side menu behaviour. Once user click an item sub-menu is closing and user is moved 1st level menu.
I think previously menu ( level2 ) after click stays espanded. Whis latest change i need to click on more time then before. correct me if Im wrong 😉. its just small my commnent related UI

Sinamics

UPDATE
Web_UI Branch is merged with master and will be deleted.
Use the installation as bellow.

sudo apt-get update sudo apt-get install git -y sudo git clone https://github.com/UAVmatrix/UAVcast.git cd UAVcast/install sudo ./install.sh web

First post is updated.

bernardino

Sinamics
Thank you Bernt.

Can you sugest a way to stream to at list two machines with gstreamer?

Sinamics

bernardino I haven`t got the time to look into that, but i guess it should be possible.
If you find a way then please tell us. 👍

« Previous Page Next Page »