HI!
I have telemetry, video, but modem shows in uavcast red. Attached images and kernel log. Meanwhile the video and telemetry switch blinks yellow, but after some seconds it goes solid green.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:18:35 BST 2021
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Zero 2 Rev 1.0
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x13c00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000017ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000017ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000017ffffff]
[    0.000000] On node 0 totalpages: 98304
[    0.000000]   DMA zone: 864 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 98304 pages, LIFO batch:31
[    0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920
[    0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 97440
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:92:D8:B8 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=tty1 root=PARTUUID=06b2d45b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 307760K/393216K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 19920K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31910 entries in 63 pages
[    0.000000] ftrace: allocated 63 pages with 6 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000024] Switching to timer-based delay loop, resolution 52ns
[    0.000698] Console: colour dummy device 80x30
[    0.001557] printk: console [tty1] enabled
[    0.001627] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001687] pid_max: default: 32768 minimum: 301
[    0.001905] LSM: Security Framework initializing
[    0.002155] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002203] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.003784] Disabling memory control group subsystem
[    0.003921] CPU: Testing write buffer coherency: ok
[    0.004425] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.005666] Setting up static identity map for 0x100000 - 0x10003c
[    0.005872] rcu: Hierarchical SRCU implementation.
[    0.006799] smp: Bringing up secondary CPUs ...
[    0.007896] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009112] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010397] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.010557] smp: Brought up 1 node, 4 CPUs
[    0.010612] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.010644] CPU: All CPU(s) started in HYP mode.
[    0.010672] CPU: Virtualization extensions available.
[    0.011533] devtmpfs: initialized
[    0.028724] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.028998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029058] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.032309] pinctrl core: initialized pinctrl subsystem
[    0.033516] NET: Registered protocol family 16
[    0.037623] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.043379] audit: initializing netlink subsys (disabled)
[    0.043696] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.044288] thermal_sys: Registered thermal governor 'step_wise'
[    0.045293] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045357] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.045552] Serial: AMBA PL011 UART driver
[    0.064821] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.080150] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:48:01, variant start_x
[    0.090162] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56
[    0.139008] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.141519] SCSI subsystem initialized
[    0.141812] usbcore: registered new interface driver usbfs
[    0.141899] usbcore: registered new interface driver hub
[    0.141991] usbcore: registered new device driver usb
[    0.144012] clocksource: Switched to clocksource arch_sys_counter
[    1.920219] VFS: Disk quotas dquot_6.6.0
[    1.920367] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.920593] FS-Cache: Loaded
[    1.920838] CacheFiles: Loaded
[    1.930755] NET: Registered protocol family 2
[    1.931775] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.931966] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    1.932065] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.932190] TCP: Hash tables configured (established 4096 bind 4096)
[    1.932353] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.932415] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.932894] NET: Registered protocol family 1
[    1.933666] RPC: Registered named UNIX socket transport module.
[    1.933701] RPC: Registered udp transport module.
[    1.933731] RPC: Registered tcp transport module.
[    1.933760] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.935496] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.939276] Initialise system trusted keyrings
[    1.939570] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.949136] zbud: loaded
[    1.951238] FS-Cache: Netfs 'nfs' registered for caching
[    1.952127] NFS: Registering the id_resolver key type
[    1.952204] Key type id_resolver registered
[    1.952235] Key type id_legacy registered
[    1.952408] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.953583] Key type asymmetric registered
[    1.953616] Asymmetric key parser 'x509' registered
[    1.953704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.953745] io scheduler mq-deadline registered
[    1.953775] io scheduler kyber registered
[    1.956449] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.967752] Console: switching to colour frame buffer device 82x26
[    1.974802] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[    1.983244] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.988614] bcm2835-rng 3f104000.rng: hwrng registered
[    1.991569] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.997531] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    2.014959] brd: module loaded
[    2.029409] loop: module loaded
[    2.033525] Loading iSCSI transport class v2.0-870.
[    2.037908] libphy: Fixed MDIO Bus: probed
[    2.040836] usbcore: registered new interface driver lan78xx
[    2.043544] usbcore: registered new interface driver smsc95xx
[    2.046184] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.776951] Core Release: 2.80a
[    2.779408] Setting default values for core params
[    2.781896] Finished setting default values for core params
[    2.984841] Using Buffer DMA mode
[    2.987351] Periodic Transfer Interrupt Enhancement - disabled
[    2.989908] Multiprocessor Interrupt Enhancement - disabled
[    2.992438] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.994913] Dedicated Tx FIFOs mode

[    2.997725] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 93d14000 dma = 0xd3d14000 len=9024
[    3.004636] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    3.015439] dwc_otg: Microframe scheduler enabled

[    3.015513] WARN::hcd_init_fiq:457: FIQ on core 1

[    3.019793] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36

[    3.024193] WARN::hcd_init_fiq:497: MPHI regs_base at 98810000
[    3.028639] dwc_otg 3f980000.usb: DWC OTG Controller
[    3.030934] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    3.033290] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[    3.035630] Init: Port Power? op_state=1
[    3.037847] Init: Power Port (0)
[    3.040367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.044955] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.047404] usb usb1: Product: DWC OTG Controller
[    3.049745] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd
[    3.052123] usb usb1: SerialNumber: 3f980000.usb
[    3.055272] hub 1-0:1.0: USB hub found
[    3.057705] hub 1-0:1.0: 1 port detected
[    3.061073] dwc_otg: FIQ enabled
[    3.061086] dwc_otg: NAK holdoff enabled
[    3.061098] dwc_otg: FIQ split-transaction FSM enabled
[    3.061115] Module dwc_common_port init
[    3.061440] usbcore: registered new interface driver usb-storage
[    3.064113] mousedev: PS/2 mouse device common for all mice
[    3.067699] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    3.072534] sdhci: Secure Digital Host Controller Interface driver
[    3.075108] sdhci: Copyright(c) Pierre Ossman
[    3.078242] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    3.081447] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    3.084270] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.087540] ledtrig-cpu: registered to indicate activity on CPUs
[    3.090455] hid: raw HID events driver (C) Jiri Kosina
[    3.093184] usbcore: registered new interface driver usbhid
[    3.095822] usbhid: USB HID core driver
[    3.103184] Initializing XFRM netlink socket
[    3.105841] NET: Registered protocol family 17
[    3.108453] Key type dns_resolver registered
[    3.111467] Registering SWP/SWPB emulation handler
[    3.113977] registered taskstats version 1
[    3.116391] Loading compiled-in X.509 certificates
[    3.119534] Key type ._fscrypt registered
[    3.121851] Key type .fscrypt registered
[    3.124198] Key type fscrypt-provisioning registered
[    3.137656] uart-pl011 3f201000.serial: there is not valid maps for state default
[    3.142496] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    3.145043] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[    3.153043] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550
[    3.159020] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    3.163297] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    3.165970] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    3.195233] sdhost: log_buf @ (ptrval) (d3d13000)
[    3.235403] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.239649] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.243823] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.246362] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    3.251735] of_cfs_init
[    3.254417] of_cfs_init: OK
[    3.257697] Waiting for root device PARTUUID=06b2d45b-02...
[    3.272104] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.276287] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.328377] random: fast init done
[    3.338780] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.347444] mmc0: new high speed SDHC card at address aaaa
[    3.350854] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
[    3.356088]  mmcblk0: p1 p2
[    3.387488] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.391767] mmc1: new high speed SDIO card at address 0001
[    3.391908] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.404263] devtmpfs: mounted
[    3.413389] Freeing unused kernel memory: 1024K
[    3.454500] Run /sbin/init as init process
[    3.456790]   with arguments:
[    3.456802]     /sbin/init
[    3.456813]   with environment:
[    3.456824]     HOME=/
[    3.456835]     TERM=linux
[    4.026904] systemd[1]: System time before build time, advancing clock.
[    4.183071] NET: Registered protocol family 10
[    4.187073] Segment Routing with IPv6
[    4.269450] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.279002] systemd[1]: Detected architecture arm.
[    4.346835] systemd[1]: Set hostname to <raspberrypi>.
[    5.098697] systemd[1]: /etc/systemd/system/mongodb.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/mongodb/mongod.pid → /run/mongodb/mongod.pid; please update the unit file accordingly.
[    5.137055] systemd[1]: Configuration file /etc/systemd/system/UAVcast.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    5.145479] systemd[1]: Configuration file /etc/systemd/system/UAVcast-Web.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    5.228285] random: systemd: uninitialized urandom read (16 bytes read)
[    5.245086] random: systemd: uninitialized urandom read (16 bytes read)
[    5.249313] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.256369] random: systemd: uninitialized urandom read (16 bytes read)
[    5.259801] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.269641] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.280417] systemd[1]: Listening on Syslog Socket.
[    6.102561] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.203607] systemd-journald[127]: Received request to flush runtime journal from PID 1
[    6.949575] mc: Linux media interface: v0.10
[    6.979855] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    6.982719] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    6.982762] [vc_sm_connected_init]: start
[    7.004080] [vc_sm_connected_init]: installed successfully
[    7.009822] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    7.011828] bcm2835_audio bcm2835_audio: there is not valid maps for state default
[    7.017215] videodev: Linux video capture interface: v2.00
[    7.049234] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    7.057740] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    7.065610] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    7.100177] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    7.416213] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.541715] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.598460] brcmfmac: F1 signature read @0x18000000=0x1542a9a6
[    7.614763] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43436-sdio for chip BCM43430/2
[    7.615049] usbcore: registered new interface driver brcmfmac
[    7.643026] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43436-sdio.raspberrypi,model-zero-2.txt failed with error -2
[    7.688366] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    7.688597] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    7.689432] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    7.690313] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    7.691235] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    7.692725] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    7.692907] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.692936] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.692958] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.693128] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.695069] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    7.695708] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    7.695896] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    7.708752] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    7.708968] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    7.710366] bcm2835-v4l2-0: scene mode selected 0, was 0
[    7.710758] bcm2835-v4l2-0: V4L2 device registered as video0 - stills mode > 1280x720
[    7.715835] bcm2835-v4l2-0: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[    7.795130] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43436-sdio for chip BCM43430/2
[    7.816117] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/2 wl0: Oct  9 2020 14:44:32 version 9.88.4.65 (test) (f149b32@shgit)  (r679549) FWID 01-f40f3270
[    9.994217] Indeed it is in host mode hprt0 = 00021501
[   10.207780] usb 1-1: new high-speed USB device number 2 using dwc_otg
[   10.208450] Indeed it is in host mode hprt0 = 00001101
[   10.228617] random: crng init done
[   10.228642] random: 7 urandom warning(s) missed due to ratelimiting
[   10.445402] usb 1-1: New USB device found, idVendor=12d1, idProduct=14fe, bcdDevice= 1.02
[   10.445428] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.445444] usb 1-1: Product: HUAWEI_MOBILE
[   10.445462] usb 1-1: Manufacturer: HUAWEI_MOBILE
[   10.445477] usb 1-1: SerialNumber: 0123456789ABCDEF
[   10.446881] usb-storage 1-1:1.0: USB Mass Storage device detected
[   10.448045] scsi host0: usb-storage 1-1:1.0
[   10.485466] 8021q: 802.1Q VLAN Support v1.8
[   11.066471] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   11.174132] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   11.179466] usbcore: registered new interface driver uas
[   11.514796] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   11.522318] scsi 0:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[   11.523109] sd 0:0:0:1: Power-on or device reset occurred
[   11.569910] sd 0:0:0:1: [sda] Attached SCSI removable disk
[   11.586854] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[   11.587963] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   11.652215] sr 0:0:0:0: Power-on or device reset occurred
[   11.653086] sr 0:0:0:0: [sr0] scsi-1 drive
[   11.653097] cdrom: Uniform CD-ROM driver Revision: 3.20
[   11.715261] sr 0:0:0:0: Attached scsi CD-ROM sr0

[   12.275560] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected

[   12.275576] usb 1-1: usbfs: usb_submit_urb returned -19
[   12.294205] usb 1-1: USB disconnect, device number 2
[   12.604112] Indeed it is in host mode hprt0 = 00021501
[   12.814044] usb 1-1: new high-speed USB device number 3 using dwc_otg
[   12.814210] Indeed it is in host mode hprt0 = 00001101
[   13.055104] usb 1-1: New USB device found, idVendor=12d1, idProduct=1506, bcdDevice= 1.02
[   13.055127] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.055141] usb 1-1: Product: HUAWEI_MOBILE
[   13.055154] usb 1-1: Manufacturer: HUAWEI_MOBILE
[   13.061637] usb-storage 1-1:1.3: USB Mass Storage device detected
[   13.066146] scsi host0: usb-storage 1-1:1.3
[   13.067223] usb-storage 1-1:1.4: USB Mass Storage device detected
[   13.068019] scsi host1: usb-storage 1-1:1.4
[   13.123249] usbcore: registered new interface driver usbserial_generic
[   13.123301] usbserial: USB Serial support registered for generic
[   13.125292] usbcore: registered new interface driver cdc_ether
[   13.132047] usbcore: registered new interface driver cdc_ncm
[   13.136831] usbcore: registered new interface driver cdc_wdm
[   13.147778] usbcore: registered new interface driver option
[   13.147846] usbserial: USB Serial support registered for GSM modem (1-port)
[   13.168926] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
[   13.168943] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
[   13.169148] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
[   13.169381] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
[   13.170724] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-3f980000.usb-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
[   13.171672] usbcore: registered new interface driver huawei_cdc_ncm
[   13.172675] option 1-1:1.0: GSM modem (1-port) converter detected
[   13.173035] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   13.173266] option 1-1:1.1: GSM modem (1-port) converter detected
[   13.178540] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   14.075037] scsi 1:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[   14.075941] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   14.076194] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   14.076442] sd 1:0:0:0: Power-on or device reset occurred
[   14.079073] sr 0:0:0:0: Power-on or device reset occurred
[   14.085536] sr 0:0:0:0: [sr0] scsi-1 drive
[   14.135985] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   14.165907] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   14.166375] sr 0:0:0:0: Attached scsi generic sg1 type 5
[   14.326964] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.326983] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.326995] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.327010] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8d fc 00 00 02 00
[   14.327025] blk_update_request: critical medium error, dev sr0, sector 145392 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   14.327069] attempt to access beyond end of device
               sr0: rw=0, want=145400, limit=145392
[   14.327081] Buffer I/O error on dev sr0, logical block 18174, async page read
[   14.443360] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.443380] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.443391] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.443406] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8c 80 00 00 3c 00
[   14.443421] blk_update_request: critical medium error, dev sr0, sector 143872 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   14.449298] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.449315] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.449327] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.449342] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8c 80 00 00 02 00
[   14.449356] blk_update_request: critical medium error, dev sr0, sector 143872 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   14.449370] Buffer I/O error on dev sr0, logical block 17984, async page read
[   14.450246] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.450274] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.450286] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.450299] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8d fa 00 00 02 00
[   14.450314] blk_update_request: critical medium error, dev sr0, sector 145384 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   14.450357] attempt to access beyond end of device
               sr0: rw=0, want=145392, limit=145384
[   14.450369] Buffer I/O error on dev sr0, logical block 18173, async page read
[   14.485784] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.485804] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.485817] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.485832] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8d f6 00 00 02 00
[   14.485847] blk_update_request: critical medium error, dev sr0, sector 145368 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   14.485894] attempt to access beyond end of device
               sr0: rw=0, want=145376, limit=145368
[   14.485906] Buffer I/O error on dev sr0, logical block 18171, async page read
[   14.510387] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.510409] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.510421] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.510435] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8c 80 00 00 3c 00
[   14.510450] blk_update_request: critical medium error, dev sr0, sector 143872 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[   14.511109] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.511122] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.511134] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.511146] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8c 80 00 00 02 00
[   14.511159] blk_update_request: critical medium error, dev sr0, sector 143872 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   14.511173] Buffer I/O error on dev sr0, logical block 17984, async page read
[   14.511983] sr 0:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s
[   14.511996] sr 0:0:0:0: [sr0] tag#0 Sense Key : 0x3 [current] 
[   14.512008] sr 0:0:0:0: [sr0] tag#0 ASC=0x11 ASCQ=0x0 
[   14.512020] sr 0:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 8d f4 00 00 02 00
[   14.512033] blk_update_request: critical medium error, dev sr0, sector 145360 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   14.512071] attempt to access beyond end of device
               sr0: rw=0, want=145368, limit=145360
[   14.512082] Buffer I/O error on dev sr0, logical block 18170, async page read
[   24.709637] capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use)
[   24.912422] tun: Universal TUN/TAP device driver, 1.6
[   62.163029] uart-pl011 3f201000.serial: no DMA platform data
Thx!